Scalecoat Proset Decal Setting Solution 2oz Bottle W/ Brush Applicator - 39571

Scalecoat Proset Professional Decal Setting Solution

Scalecoat Proset is a professional-strength decal softening and setting solution designed to conform waterslide decals tightly over rivets, panel lines, seams, wood grain, and fine surface detail. PROSET works by gently softening the decal film so it settles naturally into surface texture for a painted-on appearance.

PROSET is intended for use as Step 2 in the Scalecoat decal system. For best results, prepare the surface first with Scalecoat Preset, then apply Proset after the decal has been positioned.

What Proset Does

• Softens decal film so it conforms to surface detail.
• Pulls decals into panel lines, rivets, and seams.
• Reduces edge visibility for a painted-on look.
• Professional-strength performance for demanding decal applications.
• Works with most waterslide decals when used as directed.

How to Use (Step-by-Step)

1. Prepare the surface: Apply decals over a smooth gloss or clear-coated surface whenever possible.
2. Apply Preset (recommended): Brush Scalecoat Preset onto the surface before placing the decal to improve wetting and adhesion.
3. Position the decal: Slide the decal into final position and gently blot away excess liquid.
4. Apply Proset: Using a small brush, apply Proset directly onto the decal surface.
5. Do not touch: The decal may wrinkle or distort—this is normal. Do not move or touch the decal while Proset is working.
6. Allow to dry: As the solution evaporates, the decal will flatten and conform to surface detail.

Important Usage Notes

• Use sparingly: A light application is usually sufficient—flooding the decal can weaken or distort very thin films.
• Final position first: Once Proset is applied, the decal should not be moved.
• Not a prep solution: Proset is not intended to be used before decal placement. Use Preset for surface preparation.
• Test first: Some very thin, old, or specialty decals may react more aggressively. Always test on scrap when unsure.

Pro Tips

• Multiple applications: For heavy surface detail, allow the first application to dry completely, then reapply Proset if needed.
• Seal after drying: Once decals are fully dry, protect them with your preferred clear coat.
• Gloss before, flat after: Apply decals on gloss finishes and apply flat or satin clears afterward for best results.

Frequently Asked Questions (FAQ)

Is PROSET the same as PRESET?

No. Preset is a surface preparation solution used before decal placement. Proset is a decal softening solution used after the decal is positioned.

Can I use Proset without Preset?

Yes, but using Preset first improves wetting, reduces silvering, and helps PROSET work more evenly.

Will Proset damage paint?

When used as directed on properly cured paint and clear coats, PROSET is safe. Always ensure paint is fully cured and test when working with unknown finishes.

Why did my decal wrinkle?

Wrinkling is normal while PROSET is working. As the solution dries, the decal will relax and flatten into surface detail.

Does Proset work on all decals?

PROSET works with most waterslide decals. Extremely thin films or older decals may react more strongly—use light applications and test first.

Storage & Handling

Keep container tightly closed when not in use. Store at room temperature away from heat or freezing conditions. Keep out of reach of children.

Scalecoat Proset is intended for model hobby use. Always test before use and follow all label directions.